Find the answer to your question

Enter a keyword about your Stromer s-pedelec in the search field or browse the questions by category.

Stromer App

Why does the Stromer app show the incorrect location of my bike?

Stromer App: Incorrect location display

The localization of a Stromer Speed Pedelec with an OMNI Interface C works using GNSS (GPS & GLONASS) as well as mobile communications.

If a GNSS position can be determined while the bike is switched on, this is transmitted to and displayed in the Stromer app. The currently valid GNSS position is visualized on the OMNI Interface C by means of a white pin icon in the status bar.

If no GNSS position can be determined, instead the position of the cell tower that is currently being used by the OMNI Interface is shown, if known. A currently valid mobile communications position is visualized on the OMNI Interface by means of a gray pin icon in the status bar.

With the position of the cell tower, however, it is not possible to determine the precise location of the bike. The Stromer app currently does not show a visualization of whether it is displaying a GNSS or a mobile communications position.

Before transmitting the GNSS position, OMNI firmware versions 4.1.3.3 to 4.2.3.8 validate whether this is within the transmission range of the currently used cell tower. If this is not the case, the position of the cell tower is transmitted. From firmware version 4.2.4.6, this validation is no longer performed as there is no guarantee that the position of the cell tower is correct.

Direct link
Can I change from OMNI B to OMNI C with my Stromer ST1 that was built before October 2021?

Stromer ST1: OMNI for models until October 2021

For Stromer ST1 models produced before October 2021, an upgrade to OMNI C is unfortunately not possible, as the requirements are not available in the older OMNI B. You would need to have a new OMNI display/interface installed that meets these requirements.

Direct link
How can I activate the Autolock function of my Stromer e-bike?

Activating the Autolock function in the Stromer app

You can activate the Autolock function of your Stromer e-bike via the Stromer app.

To activate Autolock, open “SETTINGS”/“AUTOLOCK” in the Stromer app and set a timer. The minimum period that can be set at the timer is three minutes.

If you have activated the Autolock function by app, here you can set a time after which your Stromer is automatically locked once you have parked it.

Note:
Autolock can only be activated via the Stromer app. Users without an app can lock the Stromer bike directly via the touchscreen.

If you ride off on a locked bike, after a short time the anti-theft mode is activated.
If Autolock is not activated, the bike is automatically switched off if it remains inactive for 5 minutes without being locked.

Direct link
I have the Stromer OMNI BT app for my e-bike. Can I also use the new Stromer app?

Stromer app and OMNI BT app

The new Stromer app is compatible with Stromer bikes that support mobile network connectivity. If your bike only supports Bluetooth connectivity, you can continue using the Stromer OMNI BT app.

If you own a Stromer ST1, it may be possible to upgrade your bike with an OMNI C interface to use the new Stromer app. Please contact your Stromer dealer for more information.

Direct link
3G shutdown in Germany: Can I continue riding my Stromer after the shutdown?

Some European countries are planning the shutdown of the 3G network. In the event of a 3G shutdown, Stromer will still be able to access the existing 2G network. As a result communication will still be possible via the 2G network.

Direct link
3G shutdown in Switzerland: Can I still ride my Stromer without a mobile connection?

In principle, you can continue to ride your Stromer without any problems. However, connectivity via the app will no longer be available, and some "mobile" features will no longer be accessible. This could have serious consequences, particularly in terms of theft protection. 

You can find more details in this overview.

Direct link
3G shutdown in Switzerland: My Stromer is still under the official warranty. Will the OMNI Interface C be replaced free of charge?

Failures of the Stromer OMNI functions due to limited or unavailable network coverage are not covered by the warranty. Nevertheless, we want to support our myStromer customers. Therefore, until the end of July 2025, we are offering all affected end customers an upgrade under special preferential conditions. For full details on these conditions and how to order, please contact your Stromer dealer. 

Direct link
How do I activate the theft mode in the Stromer app and Stromer OMNI BT app?

Activating and deactivating theft mode

The theft mode of your Stromer can be activated and deactivated via the Stromer app and Stromer OMNI BT app.

Activating theft mode
You will find the theft mode on the start page of the Stromer app and Stromer OMNI BT app if you scroll all the way down and can activate it there.

Switching off theft mode
As soon as your Stromer is in theft mode, that status is displayed prominently on the start page of the Stromer app and Stromer OMNI BT app. You can exit the theft mode directly from the start page.

Note:
Please activate the theft mode only if you discover that the bike has been stolen and has not automatically entered the theft mode. To secure the bike in everyday use, activate the lock manually or activate “AUTOLOCK” via the Stromer app and Stromer OMNI BT app.

Direct link
My Bluetooth connection between the app and my Stromer isn't working. What can I do?

Basic Checks:

  • Make sure the Stromer app is running in the background on your smartphone, or open it manually.
  • If you’ve connected multiple bikes to the app, switch to the one where Smartlock or Riding Display is activated.
  • Check that Bluetooth is enabled on your smartphone.
    In your phone’s system settings, ensure the Stromer app has permission to use Bluetooth.
  • On your Stromer, check if the Bluetooth connection with the app is enabled: Go to Menu > Bluetooth > App.

If it’s still not working: Reset the Bluetooth Pairing

  • Disable the Bluetooth features "Riding Display" and "Smartlock" in the app.
  • Force stop the Stromer app on your smartphone.
  • In your phone’s Bluetooth settings, remove the pairing with your Stromer.
  • On your Stromer, go to Menu > Bluetooth > app > Devices, select the paired device, and remove the pairing with your phone.
  • Restart the app.
  • Reconfigure Smartlock:
    Go to Configuration > Theft Protection > Smartlock.
    The app will prompt you to reconnect your bike via Bluetooth.

Additional Tips:

  • To use Smartlock and Riding Display, your phone's Bluetooth must be enabled, and the app must be running in the background (not force-stopped).
  • These features work via Bluetooth only — no internet connection is required.
  • Only one bike can be connected via Bluetooth to the app at a time.
  • To use Smartlock or Riding Display on a different bike, first deactivate the feature on the current bike.
Direct link
Does Stromer OMNI BT contain an activation link?

No, you have to set a PIN yourself via the Stromer OMNI BT app.

Direct link
How can I register as the new owner for my Stromer bike?

Stromer E-Bike: Change of ownership

With the new Stromer OMNI app (release June 2021, from version 3.0.0), you can change the owner yourself (see “Pairing” function). To do this, the previous owner must first remove the bike in the app so that it can be reassigned.

If you have purchased a Stromer ST1 with OMNI BT app, we need the email address of your Stromer account, the VIN of the bike as well as our personal details. If you do not yet have a Stromer account, you can have an account created by a Stromer dealer or download the Stromer OMNI app and use it to create your own account.

Direct link
3G shutdown in Switzerland: Can I retrofit my Stromer?

Yes. MyStromer AG offers an upgrade. Both the order and the replacement are handled by our authorized Stromer dealers. Until the end of July 2025, we are offering the upgrade at special conditions. For all information regarding the upgrade, ordering, and replacement, please contact your local Stromer dealer directly. Our retail partners are informed and prepared. 

Direct link
3G shutdown in Switzerland: Why does myStromer AG use 4G instead of 5G for the OMNI Interface?

As an e-bike manufacturer, we rely on 4G LTE-M because this technology currently offers the best foundation for connected mobility – especially for e-bikes. It stands out thanks to:

  • High energy efficiency
  • Optimization for IoT applications – such as location tracking and theft protection
  • Excellent network coverage across Europe

With 4G technology, we ensure stable and future-proof connectivity for our customers – for many years to come.

What happens if 4G is phased out in the future?

No worries: According to current information, 4G LTE-M will remain in operation for at least another 10 years.
More information about network coverage and the future of mobile connectivity is available directly from Swisscom: Ready for the future: the Swisscom network | Swisscom

Direct link
Can I use the Stromer app for a Stromer I bought used?

Using the app for a used Stromer

To be able to use the Stromer app for your used Stromer, an authorized Stromer dealer must connect the bike to your Stromer account.

Please also ask the seller or previous owner of your Stromer s-pedelec to commission the transfer of the Stromer from his or her dealer. This ensures that he or she has actually sold or intends to sell the vehicle.

  1. Download the Stromer app to your smartphone (from the App Store or from the Google Play Store ).
  2. Your dealer creates a Stromer account for you.
  3. Provide your dealer with the following information:
  • First and last name
  • E-mail address
  • Cell phone number
  • VIN of the purchased/sold Stromer

As soon as your dealer has registered you, use the Stromer app to create a PIN for your Stromer under “Settings”/”Change PIN”. This will automatically be sent to your bike and to your registered cell phone number. You can now make full use of your used Stromer.

Direct link
3G shutdown in Switzerland: Is my Stromer affected by the shutdown of 3G technology (Swisscom)?

This depends on the installed OMNI Interface C. Only Stromer models ST1, ST1 X, ST2, ST2 S, ST3, and ST5 produced up to the end of 2021 are affected. 
You can check on your OMNI Interface C under “Menu/System/About” to see if your Stromer is affected: 
In the SUI list, check the settings “CON” and “SN”: 

  • If the entry under “CON” starts with RHL85xx… or 
  • If the entry under “SN” begins with the digits 401023 or 403470, 

then your OMNI C interface is not compatible with 4G, and you will no longer have mobile network connectivity once 3G technology is shut down.  

Direct link
How can I pair my Stromer e-bike with the new Stromer app?

You can connect your Stromer to the new Stromer app when setting up your account or at any time afterwards.

1. Start pairing your bike

You can add your Stromer in three ways:

  • After creating your account: Follow the on-screen instructions to add your bike.
  • From the home screen: Select the option to add a bike.
  • From your user account: Select the option to add another Stromer.

All three options start the same pairing process.

2. Connect your Stromer

  1. Make sure your Stromer has a mobile network connection.
  2. Follow the pairing instructions in the Stromer app.
  3. On your bike's display, open Menu → BIKE → OMNI → NEW CODE.
  4. Scan the QR code shown on your bike's display using the Stromer app.
  5. If the QR code cannot be scanned, enter the displayed numerical code manually.

Once pairing is complete, your Stromer will be linked to your account and appear in the Stromer app.

Adding another Stromer

Want to add another bike? Open the Stromer app and start the pairing process from your home screen or user account. Follow the same steps to connect your additional Stromer.

Direct link
Can I use my access data from the Stromer app for the Stromer OMNI BT app?

The Stromer app and the OMNI BT app use separate accounts.

If you have previously used the Stromer OMNI app, your existing login details may still work with the OMNI BT app. However, once you log in to the new Stromer app, these login details can no longer be used for the OMNI BT app.

Direct link
How do I activate Smartlock?

Activating Smartlock

Smartlock makes your Stromer even smarter: your bike locks and unlocks automatically when you approach or leave. There is no need to press a button. If Smartlock stops working, you can quickly fix it by reconnecting your Stromer with the OMNI app. Follow the steps below to get it working again:

Requirements

  • Smartphone with Stromer OMNI app installed
  • OMNI C or OMNI B basic with connectivity upgrade required, software version 4.5.0.3 or newer

1. Remove Stromer from your phone

  • Open OMNI app → Smartlock → Disconnect/Unlink → OK
  • Go to Bluetooth settings → remove your Stromer
    • Android: Unpair
    • iPhone: Ignore this device

2. Remove connection from your Stromer

  • Switch OMNI App → On (if not already on)
  • Under Devices → remove your phone if still listed
Omni app screen with an OFF toggle switch and a DEVICES menu item with a red arrow

3. Reconnect

  • In OMNI app → Smartlock → Configuration/Theft protection
  • On Stromer → Menu → Bluetooth → OMNI App → Devices → New pairing drag embedded assetpublishedbluetooth omni app devices
A screen for device pairing showing a 'NEW PAIRING' option, instructions, and the status 'No devices found'.
  • In OMNI app → Connect → Select your Stromer → Confirm

Trouble shooting: If you can't reconnect your bike, restart your Stromer and try again.

4. Using Smartlock

  • App must be open (background is sufficient)
  • Bike must be switched on
  • Set distance in OMNI app: Close (1–2 m), Medium (3–5 m), Far (7–10 m)

That’s it! Your Stromer is now ready to lock and unlock automatically again when you get on or off.

Direct link
How do I activate Smart.Shift Pre.Select?

Activating Smart.Shift Pre.Select

With software update 4.5.1.3, we introduced Pre.Select, a semi-automatic shifting mode. In this mode, your Stromer automatically shifts to the gear best suited to your current speed when you’re coasting without pedaling. This way, the correct gear is ready when you start pedaling again.

Requirements

  • Stromer Bike with Pinion Smart.Shift

Additional information

  • You can adjust your preferred cadence individually.
  • The configured start gear from Start.Select is also taken into account.
  • Manual shifting remains possible at any time.

How to activate

Go to:
MENU → BIKE → SMART.SHIFT → PRE.SELECT

A Smart.Shift menu screen with a back arrow, showing options: START.SELECT, TRIGGER, and PRE.SELECT, each with a red right arrow.
A digital screen for a bike computer showing 'Pre.Select' mode ON, with a description of automatic gear shifting and a cadence setting of 60.
Direct link
Didn't find an answer to your question?
View all FAQs

Still have questions?

Manuals

Need help getting started or looking for detailed information about your bike? Our manuals cover everything from setup to advanced features.

Warranty

Curious about what’s included in your warranty and how it works? Learn more about your coverage and what to expect.

Talk to a specialist

Still have questions or need personal support? Whether you're looking for advice, and answer to your question, or if your bike needs a check: your Stromer dealer is your first point of contact and happy to help.

Shaping the future of mobility.
This site is protected by reCAPTCHA.